Description The model 80210, Double Ended Shear Beam Load Cell, is readily capable for tough environments associated with truck scales. Its construction of high alloy tool steel provides optimum protection under impact loading and adverse conditions. The cell is environmentally protected with waterproof seal and is electro less nickel plated to assure resistance against corrosion. Features  10Tf to 100 Tf Capacities.  Low Profile Design.  Electroless Nickel Plated High Alloy Tool Steel Construction.  Complete Environmental Protection.  Weigh Module - WM III Available Optionally for Cell Mounting. Applications  Truck Scale.  Weigh Bridge. Performance Specification Standard Capacities 10,15,20,30,40,50,75,100 - Tf Excitation Voltage 10 VDC- Maximum 15 VDC Nominal Output 3.0 mV/ V Non - Linearity < ±0.025% FSO Hysteresis < ±0.02% FSO Non-Repeatability < ±0.01% FSO Creep (30 minutes) < ±0.03% FSO Zero Balance ±1.0% FSO Input Resistance 770 ± 20 Ohms Output Resistance 700 ± 7 Ohms Insulation Resistance (50 VDC) > 1000 Mega Ohms Safe Overload of Rated Capacity 150% Ultimate Overload of Rated Capacity 300% Allowable Side Load 50% Side Load Discrimination 500:1 Temp. Compensated Range 0-60 C Temperature Effect on Output < 0.0015% FSO/ 0 C Temperature Effect on Zero < 0.0020% FSO/ 0 C Deflection < 0.5 mm at FSO Finish & Construction Electroless Nickel Plated Tool Steel Environmental Protection Class IP68 Provided with surge protection from transient over voltage caused by lighting and power supply faults. Electrical Termination +Input Red +Output Green -Input Black -Output White   Shield CAPACITY  Tf A B C D E F G H J K Cable Length Mtrs. 10 to 45 260 216 72 64 61 52 25 6 25 13 20 75 to 100 292 254 86 76 70 60 38 10 38 20 20  View Enlarge Image    View Enlarge Diagram   Download Brochure

Copyright © 2006. ADI ARTECH TRANSDUCERS PVT. LTD. All rights reserved.