Products

 Home Products   Torque Sensors , Torque Transducers  Shaft Ends Dynamic Slipring Torque Transducer - TTD-SS

Search by Parameters
Load Cells - Weighing , Load Measurements
Force Sensors , Impact Sensors , Thrust Sensors
Tension Sensors , Tension Transducers
Torque Sensors , Torque Transducers
Pressure Sensors , Level Sensors
Multi Axis Force , Torque Transducers
Customized Load Cells , Sensors , Transducres
Flexure Sensorization - Load , Force , Torque
Mounting Accessories for Load Cells
Electronic Instrumentations for Strain , Load , Force , Torque , Pressure Measurement
Software for Strain , Load , Force , Torque , Pressure Measurement and Analysis
Load Dynamometer , Force Dynamometer , Torque Dynamometer
Test and Automation Systems


Kg to Pound Converter

kg
lbs
kgf/cm2 to PSI Converter

 kgf/cm2
 PSI
Newton Meter to Pound-Inch Converter

 n-m
 lb-in
 

Shaft Ends Dynamic Slipring Torque Transducer - TTD-SS

 Back
Model :   TTD-SS
Capacity :   0-50 NM to 0-20,000 NM
Load Direction :   Clock & Anticlock Wise
Type :   Torque Sensor / Transducer - Shaft to Shaft - Dynamic
Industries
  • Defence
  • Robotics
  • Egineering & Technical Institutes
  • Energy
  • Automotive
  • Automation Machineries
  • Aerospace
Application
  • Torque in Alternator,Pump,Turbine Engines
  • Torque in Automobile Testing of Drive Shaft & Crank Shaft
  • Torque in Electric,Hydrolic,Pneumatic Motors
  • Torque Measurement in Automotive & Aerospace
Description :  

TTD-SS is general purpose dynamic rotary type torque sensor for accurate measurement of torque in rotating shafts or equipments.
It is construcetd from Stainless Steel 17-4 ph and is strain gage based with temperature compensated over 0-60 Deg.C.
Features :  

It is compensated for axial and bending forces for accurate measurements.
Torque sensing shaft is installed in ball journals and electrical signals are transfered through high quality,low noise slip ring and brush mechanism.
Maximum operating speed offered is 5000RPM.
Cna be designed as per customer's specification. 
Electronic Instrumentation / Software :  

Compatible Electronic Systems are available optionally-
 Stand alone digital display indicator.
Analog signal converter - 0 - 10 VDC or 4 - 20 mA for PLC interface.
Digital signal converter - RS-232 , RS-485 or MODBUS RTU Protocol to interface with computer or other processing equipment.
Data acquisition system and software.
For details please click the following link-
http://www.adiartech.com/listing.aspx?cid=15
Copyright © 2012 ADI ARTECH TRANSDUCERS PVT. LTD. All rights reserved.