 |
|
|
Description
Model 60510 is a Strain Gage based low profile bending beam Load Cell and is ideal for Bench, Counting, Floor, Postal and Retail Scales. It is designed for low eccentric load sensitivity. It is Constructed from Anodized Alluminum Alloy. |
| Features |
 Single Point Capability with Minimum Off-centre Error.
Low Profile Bending Beam Load Cell Design.
Supports the Platform Size of 400 x 400 mm.
Moisture Proof Sealing for Harsh Environment. |
| Applications |
Check Weighers.
Bagging Machines.
Bench, Counting & Postal Scales. |
| Performance Specification |
| Standard Capacities |
1.5, 2, 2.5, 3, 5,10, 15, 20, 30, 40, 50, 75, 100 & 120 - kgf |
| Excitation Voltage |
10 VDC- Maximum
15 VDC |
| Nominal Output |
2.0 mV/ V |
| Non - Linearity |
< ±0.025% FSO |
| Hysteresis |
< ±0.02% FSO |
| Non-Repeatability |
< ±0.01% FSO |
| Creep (30 minutes) |
< ±0.03% FSO |
| Zero Balance |
±5.0% FSO |
| Input Resistance |
420 ± 15 Ohms |
| Output Resistance |
350 ± 3 Ohms |
| Insulation Resistance (50 VDC) |
> 1000 Mega
Ohms |
| Cable Length (4 Core Screened) |
1 mtr. Minimum |
| Safe Overload of Rated Capacity |
150% |
| Ultimate Overload of Rated Capacity |
200% |
| Temp. Compensated Range |
0-60 C |
| Temperature Effect on Output |
< 0.0015% FSO/
0 C |
| Temperature Effect on Zero |
< 0.0020% FSO/
0 C |
| Platter Size |
- |
| Eccentric Load Effect |
< 0.02% of FSO at 1/3 rated load placed
within the specified sized platter |
| Deflection |
< 0.5 mmat FSO |
| Tightening Torque |
2 m.kg. |
| Finish & Construction |
Anodized Aluminium Alloy |
| Environmental Protection Class |
IP65 |
| Electrical Termination |
 |
| +Input |
Red |
| +Output |
Green |
| -Input |
Black |
| -Output |
White |
| Shield |
|
|
|
|
|
|
 |
|
View Enlarge Image
