TTD
Rotary Torque Transducer
Capacity
- 0 - 10 NM to 0 – 50KNM
Load Direction
- Clock & Anti clock Wise
Description
- ADI ARTECH’S Torque transducer TTD is CE Certified general purpose dynamic rotary type torque sensor for accurate measurement of Torque in rotating shaft or equipment. It is constructed from hardenable, SS 17-4 ph material. This is strain gage based sensor with full temperature compensation over 1050C. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for accurate torque measurements. It is available from 0 to 50 NM to 0 to 50K NM ranges Torque sensing shaft is installed in ball journals and electrical signals are transferred through high quality, low noise slip ring and brush mechanism. TTD is available in wide variety of options: both ends shaft, both ends flange and combination of shaft & flange versions for dynamic torque measurements. It is available for speed up to 5000 RPM max. Customized version can be provided as per user’s dimensions and capacity.
Application
- Electrical tool testing
- Axle/shaft torsion test
- Bearing friction measuring
- Gear Box Testing
- Testing of starters/slip rings/brushes/clutches/brakes
- Electric/hydraulic/pneumatic motors testing
- Alternators/pumps/gas & diesel turbine engines testing
- Engine Dynamometer, Automobile Testing
Key Features
- CE Rated
- 0-10 to 0-50KNM Capacities are available.
- Stainless Steel 17-4 PH construction for resistance against shock and overload.
- Can be designed to fit your dimensional needs.
- Other capacities are available on request.
Technical Specifications
STANDARD CAPACITY
50, 100, 200, 300, 500, 1K, 2K, 3K, 5K, 10K,
15K,20K,30K,50K -NM
PERFORMANCE
PERFORMANCE
Non- Linearity
Hysteresis
Non-Repeatability
Creep(30minutes)
ZeroBalance
< ±0.1% FSO
< ±0.1% FSO
< ±0.1% FSO
< ±0.03% FSO
±1.0% FSO
ELECTRICAL
ELECTRICAL
Nominal Output
Excitation Voltage
Input Resistance
Output Resistance
Insulation Resistance(50VDC)
Cable Length
10 VDC- Maximum 15 VDC
390 Ohms
350 Ohms
> 1000 Mega Ohms(50 VDC)
5 meters
2.0 m V/ V
STRUCTURE
STRUCTURE
Safe Overload of Rated Capacity
Ultimate Overload of Rated Capacity
Deflection
Finish & Construction
Environmental Protection Class
150%
250%
< 0. 2 at FSO
Stainless Steel 17 – 4 PH
IP65 – Gage area
TEMP.
TEMP.
Compensated
Temperature
Temperature
Effect Output
Temperature
Effect Zero
10-50 °C
< 0.015% FSO/ °C
< 0.020% FSO/ °C
OPTIONS
OPTIONS
Compatible Instrument
DLC-6M, DLC-6
Industries
