TTS-SS
Static Torque Transducer with Angle
Capacity
- 0-50 to 0-10KNM.
Load Direction
- Clock & Anti clock Wise
Description
-
ADI ARTECH’S Torque transducer TTD-SS-MF is CE Certified general purpose dynamic rotary type torque sensor for accurate measurement of Torque in rotating shaft or equipment. It is constructed from SS 17-4 PH material. This is strain gage based sensor with full temperature Compensation over 1050C. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for accurate torque measurements. It is available from 0 to 10NM to 0 to 50KNM ranges. Torque sensing shaft is installed in ball journals and electrical signals are transferred through high quality, low noise slip ring and brush mechanism. TTD is available in wide variety of options: both ends shaft, both ends flange and combination of shaft & flange versions for dynamic torque measurements. It is available for speed up to 2500 RPM max. Customized version can be provided as per user’s dimensions and capacity.
This Model is provided with one end male shaft with key slot and other end with female hollow end with key way slot for locking.
Application
- Motor, Switches, Shaft & Axle torque measurement.
- To measure operating Torque of Industrial Valve & actuators.
- Automotive, Aerospace & offshore valves test rigs.
- Torque measurement of Industrial Fastener.
Key Features
- CE Rated
- Excellent selection of range from 0-50 to 0-10KNM.
- SS 17-4 PH construction for resistance against shock and overload.
- Complete Environmental Protection -IP65 class.
- Can be customized to suit customer’s requirements.
- Axial & Bending force are compensated.
Technical Specifications
STANDARD CAPACITY
50,100,200,300,500,1K,2K,3,5K,
10K – NM ,
0-360° – 0.5° least count
PERFORMANCE
PERFORMANCE
Non- Linearity
Hysteresis
Non-Repeatability
Creep(30minutes)
ZeroBalance
< ±0.1% FSO
< ±0.1% FSO
< ±0.1% FSO
< ±0.03% FSO
±1.0% FSO
ELECTRICAL
ELECTRICAL
Nominal Output
Excitation Voltage
Input Resistance
Output Resistance
Insulation Resistance(50VDC)
Cable Length
10 VDC- Maximum 15
392 ± 15 Ohms
350 ± 3 Ohms
> 1000 Mega Ohms(50 VDC)
5 meters
2.0 m V/ V
STRUCTURE
STRUCTURE
Safe Overload
Ultimate Overload
Rotational Angular Deflection
Finish & Construction
Environmental Protection Class
150% FSO
250% FSO
< 0.4 at FSO
Stainless Steel 17 – 4 PH
IP65 for Gage area
TEMP.
TEMP.
Compensated
Temperature
Temperature
Effect Output
Temperature
Effect Zero
10-50 °C
< 0.05% FSO/ °C
< 0.05% FSO/ °C
OPTIONS
OPTIONS
Compatible Instrument
DLC-6M, DLC-6
Industries
