TTD-SS- Base Mounted
Rotary Torque Transducer
Capacity
- 0-10NM to 0-50,000NM
Load Direction
- Clock & Anti clock Wise
Description
- ADI ARTECH’S Torque transducer TTD-SS with Base is general purpose dynamic rotary type torque sensor for accurate measurement of Torque in rotating shaft or equipment. It is constructed from SS 17-4 ph material. This is strain gage based sensor with full temperature compensation over 1050C. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for accurate torque measurements. It is available from 0 to 10 NM to 0 to 50K NM ranges. Torque sensing shaft is installed in ball journals and electrical signals are transferred through high quality, low noise slip ring and brush mechanism. TTD is available in wide variety of options: both ends shaft, both ends flange and combination of shaft & flange versions for dynamic torque measurements. It is available for speed up to 300 RPM max. Customized version can be provided as per user’s dimensions and capacity.
Application
- Electrical Motor Power Effeciency Test
- Torque in Automobile Testing of Drive Shaft & Crank Shaft
- Engine Test Dynamometer
- Torque in Alternator,Pump,Turbine Engines
- Torque Measurement in Automotive & Aerospace
Key Features
- 0-10 to 0-50KNM Capacities are available.
- Stainless Steel 17-4 PH construction for resistance against shock and overload.
- Can be designed to fit your dimensional needs.
- Other capacities are available on request.
Technical Specifications
STANDARD CAPACITY
0-10NM to 0-50,000NM
PERFORMANCE
PERFORMANCE
Non- Linearity
Hysteresis
Non-Repeatability
Creep(30minutes)
ZeroBalance
< ±0.1% FSO
< ±0.1% FSO
< ±0.1% FSO
< ±0.3% FSO
±1.0% FSO
ELECTRICAL
ELECTRICAL
Output
Excitation Voltage
Input Resistance
Output Resistance
Insulation Resistance
10 VDC- Maximum 15 VDC
390 Ohms
350 Ohms
> 1000 Mega Ohms
3.00 mV/V±0. 05%:20210
(Customized Output ailable on request)
STRUCTURE
STRUCTURE
Safe Overload
Of Rated Capacity
Ultimate Overload
of Rated Capacity
Allowable Side Load
Deflection
Finish Product
IP Rating
150% OF RC
200% OF RC
50%
< 0.4 mm at FSO
Stainless Steel 17 – 4 PH
IP65
TEMP.
TEMP.
Operating
Temperature
Compensated
Temperature
Temperature
Effect Output
Temperature
Effect Zero
10 to 050ºC
10-50ºC
< 0.0015% FSO/°C
< 0.0020% FSO/°C
OPTIONS
OPTIONS
Compatible Instrument
DLC-6M, DLC-6
Industries
