ADI ARTECH

DLC-6-M

Digital Load Indicator and Controller

Capacity
Load Direction

Description

Options

Key Features

Technical Specifications

STANDARDCAPACITY

20,50,75,100,200,250,300,500,750         – Kgf.

1,1.5,2,2.5,3,5,7.5,10,15,20, 30          – Tf.

Display and Keyboard

Display Type
Indicating LEDs
Key Type
0.56 inch 7 Segment RED 6 Digit
3mm RED Indicating Bright LEDs
4 Tactile Keys

A/D Converter

Type
Conversion Frequency
Analog Input Range
Resolution
Nominal 10Hz. Max 30Hz can be provided upon request
-19.5mV to +19.5mV
Internal 100,000 counts and usable 10,000 counts
24-bit Delta Sigma Analog to Digital converter with 50Hz and 60Hz rejection

Calibration and Functions

Calibration
Weighing Functions
Other Functions
Calibration is performedby appliying weighs. 10 step calibration options are also available upon request.Factory calibration rest or recall facility available.
Tare / Zero,External Tare / Zero net and Gross
1. Start and Stop 2. Peak adn Valley Hold and Clear
1. Functions are optional. Need to ask for the same while placing the order . Any one function set can be made available

Load Cells

Excitation
Number of Load Cells
5 VDc max.20mA
Supports upto 12 Load Cells through junction box or parallel wiring
Note: Supports 4 wire and 6 wire load cell connections.

Serial Options

Serial Protocol
Baud Rate
Data Bits
Stop Bits
Parity
MODBUS RTU
1200,2400, 4800,9600,14400, 19200,38400, 56000,57600, 115200 supported baud rates
8
1
None , Odd and Even

Optional

TCP / IP
Jumbo Display
Analog Output

Relays

MODBUS TCP/IP interface provided upon request
6 Digit 4-inch 7 segment readout option available for interfacing with DLC-6 series load indicator/controller
0-10 VDc or 4-20 mA or -10 VDc output option available

2 field programmable relay output available. Max current 2 Amp.
Can be programmed in ALARM or CONTROL mode and user settable set points available

Note: This option is to be specified at the time of ordering

Application

Industries

Scroll to Top