TTD-SS-WL
Rotary Torque Transducer Telemetry Type
Capacity
- 0 - 20 TO 0 – 50KNM
Load Direction
- Clock & Anti clock Wise
Description
-
ADI ARTECH’S Torque Transducer TTD is CE Certified general purpose dynamic rotary type torque sensor for accurate measurement of Torque in rotating shaft or equipment. It is constructed from hardened SS 17-4 ph. material. This is strain gage based sensor with full temperature compensation over 1050C. It is Embedded with measuring circuit, ADC, Microcontroller and wireless Transmitter. Compatible remote Display is provided. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for accurate torque measurements. It is available from 0 to 20 NM to 0 to 50000 NM ranges.
TTD is available in wide variety of options: both ends shaft, both ends flange and combination of shaft & flange versions for dynamic torque measurements. It is also offered for speed up to 5000 RPM max. Customized version can be provided as per user’s dimensions and capacity.
Application
- Electrical tool testing
- Axle/shaft torsion test
- Bearing friction measuring
- Gear Box Testing
- Testing of starters/slip rings/brushes/clutches/brakes
- Electric/hydraulic/pneumatic motors testing
- Alternators/pumps/gas & diesel turbine engines testing
- Engine Dynamometer, Automobile Testing
Key Features
- CE Rated
- 0 - 20 TO 0 – 50KNM Capacities available.
- Stainless Steel 17-4 PH construction for resistance against shock and overload.
- Can be designed to fit your dimensional needs.
- Other capacities are available on request.
Technical Specifications
STANDARD CAPACITY
20, 50, 100, 200, 300, 500, 1K, 2K, 3K, 5K,
10K, 15K, 20K, 30K, 40K, 50K
PERFORMANCE
PERFORMANCE
RPM
Non- Linearity
Hysteresis
Non-Repeatability
Creep(30minutes)
RF Transmitter
ZeroBalance
5000 max Non – Contact type with Radio
Telemetry system
< ±0.1% FSO
< ±0.1% FSO
< ±0.25% FSO
< ±0.05% FSO
Battery operated with inbuilt battery
installed on the Torque Shaft. Transmits
sensor signal via Radio Telemetry to
stationary Receiver. Power on/off switch,
Power socket, Power status LEDs provided
on the body. Transmitter range-15 Meters.
±1.0% FSO
ELECTRICAL
ELECTRICAL
Nominal Output
Excitation Voltage
Input Resistance
Output Resistance
Insulation Resistance(50VDC)
Cable Length
10 VDC
390 Ohms
350 Ohms
> 1000 Mega Ohms(50 VDC)
5 meters
2m V / V + / – 0.5
STRUCTURE
STRUCTURE
Safe Overload of Rated Capacity
Ultimate Overload of Rated Capacity
Display & Receiver
Display & Receiver Power
Finish & Construction of TTD
IP Rating
150%
250%
LED with 5 Digit Receives Radio Signal from
Transmitter fitted on sensor. Max. distance-
5Mtrs.
230VAC @ 50 HZ
Stainless Steel 17 – 4 PH
IP-65 Gage Area
TEMP.
TEMP.
Compensated
Temperature
Zero Drift with temperature
Span Drift with temperature
Operating Temperature
10-50 °C
± 0.02% of span /°C
± 0.02% of span /°C
0 to 50 °C
OPTIONS
OPTIONS
Compatible Instrument
Wireless Telemetry
DLC-6M, DLC-6
With remote Display
Industries
