TTD-FF-WL-RPM
Rotary Torque Transducer Telemetry with RPM
Capacity
- 0-5NM to 0-50KNM.
Load Direction
- Clock & Anti clock Wise
Description
- ADI ARTECH’S Torque transducer TTD-FF-WL-RPM is CE Certified flanged type general purpose dynamic rotary type sensor for accurate measurement of Torque, RPM and Power in Motors & Rotating equipment. It is constructed from hardened SS17-4 PH / Tool Steel material. This is strain gage based sensor with full temperature compensation over 1050C. It is very accurate, reliable and sturdy for industrial applications. It is compensated for axial and bending forces for precise torque measurements. It is available from 0-50NM to 0-50KNM ranges. TTD-FF is Wireless Telemetry torque sensor. This wireless transmitting device is supported with remote indicator duly calibrated. Transmitter with signal conditioner is supported with battery power within the sensor. System is supplied with Rated Torque Sensor, Hall Effect RPM Sensor and Display unit. This can be offered with customer’s required specification. This system also can be provided optionally with user’s software for graphics, tabulation and analysis.
Application
- Electrical tool testing
- Axle/shaft torsion test
- Bearing friction measuring
- Gear Box Testing
- Testing of starters/slip rings/brushes/clutches/brakes
- Electric/hydraulic/pneumatic motors testing
- Alternators/pumps/gas & diesel turbine engines testing
- Engine Dynamometer, Automobile Testing
Key Features
- CE Complied
- Standard Ranges-0-5NM to 0-50KNM.
- Hardened SS17-4 PH / Tool Steel construction for resistance against shock and overload.
- Can be designed to fit your dimensional needs.
- Other capacities are available on request up to 50KNM. Max.
Technical Specifications
STANDARD CAPACITY
0-5 NM to 0-50 KNM.
PERFORMANCE
PERFORMANCE
RPM
Non- Linearity
Hysteresis
Non-Repeatability
Creep(30minutes)
RF Transmitter
Rechargeable Battery
ZeroBalance
4000 max – Non – Contact type with Radio Telemetry
system
< ±0.2% FSO
< ±0.2% FSO
< ±0.5% FSO
< ±0.03% FSO
Battery operated with inbuilt battery & installed on the
Torque Shaft, Transmitters sensor signal via Radio
Telemetry to stationary Receiver
Li-Ion battery pack capable of 20 Hrs. run time installed
in Transmitter with one spare battery & battery
charger.
±1.0% FSO
ELECTRICAL
ELECTRICAL
Nominal Output
Excitation Voltage
Input Resistance
Output Resistance
Insulation Resistance(50VDC)
Cable Length
10 VDC
390 Ohms
350 Ohms
> 1000 Mega Ohms(50 VDC)
5 meters
2m V / V + / – 0.5
STRUCTURE
STRUCTURE
Safe Overload of Rated Capacity
Ultimate Overload of Rated Capacity
Display & Receiver
Display & Receiver Power
Finish & Construction of TTD
IP rating
150%
200%
Receives Radio Signal from Transmitter.
Display for Torque, RPM & Power.
230VAC @ 50 HZ
Tool Steel or Stainless Steel 17 – 4 PH
IP-65 Gage Area
TEMP.
TEMP.
Compensated
Temperature
Zero Drift with temperature
Span Drift with temperature
Operating Temperature
10-50 0C
± 0.02% of span / °C
± 0.02% of span / °C
10 to 50 °C
OPTIONS
OPTIONS
Compatible Instrument
Wireless Telemetry
DLC-6M, DLC-6, Summing Junction Box
With remote Display
Industries
